Puretest removable ELISA strip plates combine clear flat-bottom polystyrene wells with a supporting frame. Twelve detachable 8-well strips form a complete 96-well layout, allowing the number of strips to be matched to each assay run.
Not every ELISA run needs a full plate. Puretest removable ELISA plates use twelve 8-well strips in a support frame, providing 96 positions when fully assembled. This modular format allows laboratories to plan smaller batches without handling a new fixed-well plate for every run.
The clear polystyrene wells have flat bottoms for absorbance-based assay workflows. Choose the binding surface to match your coating chemistry, and evaluate the complete strip-and-frame assembly on the intended reader or washer. For full-batch work with permanently fixed wells, see our 96-well solid ELISA plate.
| Structural feature | Function and handling consideration |
|---|---|
| Removable eight-well strip | Groups eight reaction wells into one module. This description refers to removable strips; it does not assume the wells can be individually snapped apart. |
| Support frame | Maintains the location of installed strips. Ensure each strip is fully seated and level before pipetting or instrument loading. |
| Flat-bottom wells | Provide an optical reading surface. Avoid scratches or fingerprints on the underside. |
| Clear polystyrene | Makes liquid levels, bubbles and residual wash liquid visible during setup and inspection. |
| Position markings | Help preserve orientation after loading or removing strips. Record the original location in your plate map. |
The product images show removable strips beside the frame, with vacant frame positions visible. Background and lighting have been edited for presentation. The detail view shows the same strip-and-frame configuration, not a separate product variant. Confirm the supplied strip count, frame and accessories in the quotation.
| Parameter | Specification / selection information |
|---|---|
| Product format | Removable-strip ELISA microplate |
| Fully assembled capacity | 96 reaction wells |
| Strip arrangement | 12 strips × 8 wells |
| Assembled layout | 8 rows × 12 columns |
| Well material | Polystyrene (PS) |
| Well appearance | Clear |
| Well bottom | Flat bottom |
| Support | Rectangular strip-holding frame |
| Binding surface | Specify high- or medium-binding requirements; for low-binding or other surface needs, ask for the matching configuration |
| Assay coating | No target-specific antibody or antigen coating is specified; develop coating and blocking with your assay protocol |
| Packaging | Specify the required protective packaging, assemblies per carton and any separate strip supply in the quotation |
| Volume / dimensional data | Request the selected product drawing and recommended working-volume information |
| Quality requirements | Confirm the required sterility, nuclease, endotoxin and lot-documentation status in the supply specification |
| Intended use | Laboratory research and assay development; not supplied here as a validated diagnostic test |
Count all required wells, including standards, blanks, controls and replicates, then round up to a whole number of 8-well strips. The examples below describe well positions, not sample capacity; the number of samples depends on the assay layout.
| Total wells required | Strips to load | Available positions |
|---|---|---|
| 24 wells | 3 strips | 24 positions |
| 40 wells | 5 strips | 40 positions |
| 50 wells | 7 strips | 56 positions |
| 96 wells | 12 strips | 96 positions |
Use only a partial-frame arrangement permitted by the instrument and the validated method. Some washers or automated handlers require a complete frame or specific loading positions. Do not assume an empty frame slot can be ignored by the instrument.
Choose the surface around the molecule being immobilized, not only the product name. A high-binding surface may help with protein immobilization, while another grade may give a more useful balance of signal and nonspecific adsorption. Compare the blank, signal-to-background ratio and replicate variation under the same assay conditions.
The clear format shown here is intended for consideration in colorimetric ELISA workflows. Fluorescence or luminescence may require a different optical plate construction. Ask about configuration availability and validate with the planned detection chemistry rather than treating clear, white and black plates as interchangeable.
Used wells are not intended to be cleaned and reused for a new assay. Treat the plate as a single-use assay consumable. Follow laboratory procedures for disposal of exposed material.
| Tell us your requirement | Detail to include |
|---|---|
| Plate configuration | 96-well removable plate with 12 × 8-well strips and support frame |
| Binding and readout | Required surface grade, coating molecule where relevant, and detection chemistry |
| Supply format | Complete assemblies or a request for separate strips; confirm frame inclusion and compatibility |
| Quantity and packaging | Trial quantity, expected bulk demand, carton preference and labeling needs |
| Compatibility review | Reader/washer model and any dimensional drawing for the currently used consumable |
| Delivery and documentation | Destination country, required delivery window and quality documents for supplier qualification |
These details help avoid quoting an incompatible frame or a surface grade that does not suit your method. Sample availability, pack quantities and lead time should be confirmed for the selected configuration before ordering.
A fully assembled 96-well plate contains twelve strips with eight wells each. The individual strip is the modular unit described on this page.
Yes, the removable format enables partial-plate planning. First confirm that your reader, washer and handling method support the intended arrangement, and still include the controls required by the assay.
Removing an entire strip and separating individual wells are different features. Individual-well breakability is not specified for this listing. Confirm the required strip construction against the product drawing before ordering.
Do not assume interchangeability. Strip fit, binding surface and manufacturing variation may affect handling or assay comparisons. Qualify the exact strip/frame combination and follow the lot-consistency requirements of your method.
The illustrated product is an assembled strip plate with a supporting frame. Include your requested supply format in the inquiry; ask the team to confirm frame inclusion and availability of separate strips.
Neither. It is an ELISA plate consumable without a specified target-specific reagent system. It is not a thin-wall PCR tube strip for thermal cycling.
Send your required binding grade, trial or bulk quantity, reader/washer model and delivery country for a focused product and quotation review.
Prefer fixed wells? Explore the 96-well solid ELISA plate.
General Inquiries
Tell us the product, specifications and quantity you need. We’ll reply by email with the next steps.
