1000 µL Pipette Tips Compatible with Opentrons OT-2, Filtered & Non-Filtered

1000 µL Filtered and Non-Filtered Pipette Tips for Opentrons OT-2

Puretest 1000 µL tips provide filtered and non-filtered configuration choices for compatible Opentrons OT-2 P1000 GEN2 single-channel workflows. The large-volume format supports approximately 100–1000 µL transfers for reagent preparation, sample processing and plate or tube workflows.

Filtered racks are intended for contamination-conscious methods, while non-filtered tips can be supplied in complete racks or refill configurations for routine high-volume transfer. Both formats require confirmation of tip length, rack definition, nozzle sealing and destination-labware clearance.

Important: These are independent compatible consumables. Qualify the selected filtered or non-filtered item on the exact OT-2 P1000 system and protocol before routine use.

Product Highlights

• 1000 µL capacity: approximately 100–1000 µL working-volume target.
• Two fluid-path options: filtered for aerosol control or non-filtered for routine transfer.
• Rack and refill availability: complete racks for both configurations; non-filtered refills subject to confirmed supply.
• P1000 workflow fit: designed for OT-2 P1000 GEN2 single-channel pipettes.
• Clear polypropylene: non-conductive body for visual inspection of large-volume aspiration and dispense.
• Qualification support: samples, drawings and current documents for laboratories and distributors.

Tip Structure and Functional Design

Large-volume tips require sufficient shaft rigidity and a consistent cone seal to manage higher liquid mass without leakage or excessive residual volume. The distal geometry must also maintain clearance around tubes, reservoirs and deep-well plates. Filtered versions include a barrier above the normal liquid column; non-filtered versions provide an open internal air path.

The P1000 is a single-channel pipette, so qualification should cover pickup from different rack positions, full aspiration at the method maximum, blow-out behavior, residual droplets and clean ejection. Refill inserts additionally require verification in the intended reusable base.

Technical Specifications and Selection Notes

Platform, Pipette and Rack Compatibility

Filtered, Non-Filtered and Packaging Configurations

Choose filtered 1000 µL tips when aerosol protection is required. Choose non-filtered 1000 µL tips for validated routine workflows and when a refill format is preferred. Confirm the exact capacity, barrier, packaging, sterility and purity documents on every quotation.

Quality and Configuration Control

• Controlled molding and dimensional inspection support repeatable nozzle sealing, pickup height and ejection behavior across the 96-position rack.
• Transparent polypropylene provides direct visual confirmation of liquid movement and residual droplets; filtered versions include a hydrophobic barrier selected for the intended format.
• Purity and sterilization information is configuration-specific and should be verified against the current specification and lot documentation.
• Lot identification, packaging integrity, dimensional drawings, material declarations and available quality documents can be supplied for the confirmed ordering configuration.
• Sterility, purity, filter, packaging and shelf-life claims apply only when they are listed on the current quotation, specification sheet and lot documentation.

Application Guide

• Reagent and buffer preparation
• Tube-to-plate and reservoir transfers
• Deep-well plate workflows
• Sample dilution and normalization
• High-volume mixing and aliquoting

Recommended Qualification Workflow

1. Confirm the platform: identify the exact robot, pipette model, channel count and installed software or protocol definition.
2. Select the smallest suitable capacity: choose a tip whose qualified working range covers the intended transfer volume.
3. Confirm the configuration: filtered or non-filtered, rack or refill, sterile or non-sterile, and required purity documentation.
4. Run mechanical checks: evaluate full-rack pickup, nozzle sealing, tip height, labware clearance and clean ejection.
5. Run liquid-handling checks: confirm aspiration, dispense, residual volume, accuracy, precision and contamination control with representative liquids and labware.
6. Lock the approved item: record the final item code, tip configuration, rack definition and validated protocol settings before routine procurement.

Ordering Information

To receive the correct quotation, specify: OT-2 model, P1000 pipette generation, filtered or non-filtered requirement, rack or refill, base information, sterility/purity requirements and annual volume. Puretest supports evaluation samples, distributor supply, recurring bulk orders and OEM/private-label programs for confirmed configurations.

Frequently Asked Questions

Does this page cover filtered and non-filtered tips?

Yes. The exact configuration is selected during quotation and must be qualified separately.

What volume range should I use?

Use approximately 100–1000 µL as the initial selection range and verify method performance at actual working volumes.

Can a 1000 µL tip be used on a P300 pipette?

No. Select the tip family intended for the installed pipette capacity and platform.

Are OT-2 and Flex 1000 µL tips interchangeable?

No. The platforms use different tip and rack interfaces.

Can Puretest supply refills?

Non-filtered refill supply can be quoted for confirmed configurations; provide the intended base details.

Request Samples, Documents or a Quotation

Send your robot model, pipette model, channel count, target volume, filtered/non-filtered preference, rack/refill preference, sterility requirement and estimated annual demand. We will match the most appropriate configuration and provide available qualification documents.

Contact Puretest for an evaluation sample or quotation

Opentrons and the related product names are trademarks of their respective owner. Puretest is an independent compatible-consumables supplier and is not affiliated with or endorsed by Opentrons Labworks, Inc.